Tungsten Carbide Nibs
Tungsten carbide nibs, also called tungsten carbide drawing dies, are used in drawing industries for drawing of different materials like Mild Steel (M.S), High Carbon (H.C), Stainless Steel (S.S), Brass, Aluminum, etc because of their superior strength, toughness, and wear resistance. It has very high compressive strength and hence can take high pressure.
We can supply varies of tungsten carbide grades, such as YG3,YG3X,YG6,YG6X,YG6A,YG8, and so on.
The performance and uses of grades as follows:
|Grade||Equal to ISO Category Number||Performance||uses|
| Bend Strength
|YG3||K01||14.9-15.3||1180||≥90.5||Qualified for fine turning and half-fine turning when cast iron, non-ferrous metal, alloys as well as non-alloy materials cutting consecutively. Can make wire drawing of steel and non-ferrous metal. Also qualified for sand-blasting nozzles.|
|YG6X||K10||14.8-15.1||≥1560||≥91.0||Qualified for machining of chilled cast iron, alloy cast iron, refractory steel and alloy steel. Also Qualified for the machining of common cast iron.|
|YG6||K20||14.7-15.1||≥1670||≥89.5||Qualified for finish machining and semi-finish machining for the cast iron, non-ferrous metal, alloy and unalloyed materials. Also qualified for wire drawing for the steel and non-ferrous metal, electric drill for geology use and steel drill etc.|
|YG8||K20-K30||14.6-14.9||≥1840||≥89||Qualified for rough machining of cast iron, non-ferrous metal, and nonmetal materials, drawing of steel, non-ferrous metal and pipes, various drills for geology use, tools for machine manufacture and wearing parts.|
If you have any other question or inquiry of tungsten carbide nibs, please feel free to contact us through the following methods:
Tel.: +86 592 5129696/86 592 5129595
Fax: +86 592 5129797
2.Tungsten Carbide Wear Parts
3.Tungsten Carbide Plates